Car Sticker!!It can be White Matte Oracal 010M - Matte WhiteBlack Matte Oracal 070M - Matte Black DESCRIPTIONORACAL 651 Intermediate Cal VinylThanks to its proprietary formulation and construction, ORACAL Series 651 has become the industry standard for high performance calendered films. Only 2.5 mils thick, ORACAL 651 offers six year outdoor durability, flexibility, thermal print compatibility. This high-quality film is a good choice for moderately complex jobs that dont require the extra conformability provided by ORACALs cast film What does this mean exactly?Well lets take a look!-Can be applied to almost any hard, flat surface-Will last for 5-7 years without peeling, fading, tearing, etc.-Easy application -Hundreds of uses Where can you put your decals?Your imagination is the limit!-Car windows-Laptops-Bumpers-Lunch Boxes-Tool Boxes-Skateboards-Motorcycles-and MANY MANY more! CUSTOM WORKWe can also do custom work! So if you have any ideas that you dont see on the store, please reach out to us for a FREE quote! How to apply a vinyl decal:Remember be carefully, when the sticker has thin parts it can be damage easily. Step 1Clean the area thoroughly with rubbing alcohol or soap and water. Do not use Windex or similar products because it will leave a residue behind that will prevent the sticker from adhering well. Step 2Prepare the sticker for application by firmly rubbing a squeegee or credit card across the clear transfer tape. This removes any air bubbles that may have formed and makes the sticker cling to the transfer tape. Step 3Peel the white paper backing off the sticker. If the sticker clings to the backing, slowly replace the paper backing and repeat Step 2. Step 4Slowly lower the sticker onto the surface and rub it in place firmly with a squeegee or credit card. For best results, wait 24 hours before moving to the next step. Step 5Slowly peel the clear transfer tape off at an angle. Be careful not to pull the sticker off the surface. If sticker pulls away from the surface repeat Step 4. *Use a pin to poke any air bubbles in the center and push the air out through the hole.*For best results do not apply a sticker in extreme hot or cold temperatures. Thanks!!